Merry Christmas Card with Washi Tape and Christmas Tree with Tutorial

I'm Card Captain of the enjoyMichaelStrongstamps Yahoo Group for this week, so for 5 days I'll be showing you several works using Michael Strong's stamps. I hope you'll find them inspiring.

My 4th card for this week is a Merry Christmas Card with Washi Tape and 
Christmas Tree.

It is followed by a step-by-step tutorial, with photos.

I hope you'll try it and enjoy it… It takes less time to make the card than to post 
about it (lol)

Today's card is all about making the background papers yourself.

This technique is fun and easy, and it enables you to create various backgrounds, to make different cards.

I made the main background by stamping Snowflakesfrom Designs by Ryn on a leather textured red CS.

I also stamped the sentiment "Merry Christmas" on a scrap of the same red leather textured CS, and inked its edges using Platinum ink, the same ink I used to stamp the Snowflakes, to enhance it.

I also added 2 brads, all shiny and bright.

Then I used a piece of plain white CS, which I wrapped with several stripes of Washi Tape in Christmas related colors and themes.

You can use any combination of Washi Tape, I simply picked those which will pop out and will be contrasted to the red background. Once you're satisfied with the size of the wrapped CS, you can trim its edge off.

Here's the CS wrapped with Washi Tape:

And as Washi Tape sometimes has a tendency to become loose (it doesn't always stick to its place), I wrapped it behind both sides of the CS, and I adhered the 3D double sided foam tape on the back side of the CS exactly ON the Washi Tape's ends, so the foam tape secures them:

Now I used MichaelStrong's Cloisonné Christmas Tree stamp (large).

I stamped and heat embossed it on a scrap of the same red leather textured CS, then I cut it and added a few pearls for some more glam.

I adhered the Snowflakes background paper to the card basis, then the Washi Tape background paper and the decorated piece with the sentiment, using a double sided foam tape for a 3D effect.

I added the Christmas Tree on top of the Washi Tape background paper, also 3D. You can see it in 2 different color combos.

You can see the 3D effect here:

It sure feels like the right time to create Christmas Card.

We don't celebrate Christmas in Israel, but I'd like to send Christmas cards to my friends worldwide who celebrate Christmas.

Please let me know if you liked my tutorial, if it was clear (I'm always happy to answer questions), and if it made you want to create something similar.

(You can enlarge each photo by clicking on it) 
Thanks for stopping by, I hope you enjoyed. Have a creative day! Dorly

Tree and Reindeer Christmas Card

This Christmas card was made by a special request to be sent to an Irish lady.

Ingredients:

Light green canvas textured CS for the card's basis
Background patterned paper - Christmas book by Crafty Individuals
Red leather textured CS (the tree)
Forest green CS (the reindeer)

Off white CS (the standing reindeer)
Shiny gold paper
Red envelope
Sizzix Bigz Die - Reindeer by Tim Holtz
Michael Strong's Cloisonné Christmas Tree Die Cutter (large)
1" snowflake punch
Iron Gate Edger Punch by Martha Stewart
Tiny clear bling (for the reindeer's eye)
White and red half pearls (with sticky back)

Gold Gel pen

I cut and punched the papers and layered the images on top of them.
Both the tree and the reindeer were glued 3D for extra dimension.
I added half pearls and a bling for some Christmas glam.

I added one more reindeer inside the card, with a golden eye.

Merry Christmas to you and to your loved ones!
I hope your holiday is filled with laughter and joy, and I wish you a year of light and love!
Dorly

(You can enlarge each photo by clicking on it)

Thanks for stopping by, I hope you enjoyed. Have a creative day! Dorly

Michael Strong Holiday Tag Blog Hop

Here's my Christmas Tag for the Michael Strong's Yahoo group Holiday Tag Blog Hop.
Thank you for stopping by today.
I hope you'll be inspired to make your own holiday tag.
Although we don't celebrate Christmas, I make Christmas and Holiday cards and tags for my overseas friends, and I think it's a fabulous season (and a good excuse to create some more!)

Supplies used:
White CS for the tag's basis
Merry Christmas patterned paper from my stash
Grey leather textured CS
Michael Strong's Cloisonné Christmas Tree Stamp (medium & small)
Embossing ink
Hematite EP
Tim Holtz Tonic Paper Distresser
Blending tool
Ranger Distress Ink - Pine Needles
Red ribbon
Checkered fabric heart-shaped buckle
Clear, green and red blings
Fibers from my stash

You're welcome to leave a comment in each blog. Enjoy your tour!
Your next stop is Heidi's blog
If you get lost you can see the list of participants in Hetty's blog
There's also a bonus: search the letters in each blog.
My letter is "y".
When you have collected all 13 letters from all 13 blogs, make a wish out of them and you'll enter a prize drawing.
The prize will be a Michael Strong stamp, of course.
Send your answer to Hetty privately: buzzy4you@hotmail.com NOT in the comment!
Hetty will pick a winner on Wednesday, December 7th.

Have a wonderful holiday season!
(You can enlarge each photo by clicking on it)
Thanks for stopping by, I hope you enjoyed. Have a creative day! Dorly

Extra Sparkling Christmas Card

I'm Card Captain of the enjoyMichaelStrongstamps Yahoo Group for this week, so for 5 days I'll be showing you several works using Michael Strong's stamps. I hope you'll find them inspiring.
Here's my 3rd card for this week - another Christmas card, using Iris Folding again. What a fun technique, you should try it.
I re-used gift wrapping hologram papers for an extra sparkling effect.
You can find a very clear tutorial in Hetty's blog
You can find the pattern in Michael Strong's blog.
If you want your pattern to match the size of Michael Strong's large Christmas Tree Die Cutter, print it after resizing it to exactly 11.31x 14.86 cms (who said size doesn't matter? lol)

Ingredients:
Red leather textured CS for the card's basis
Black canvas textured CS for the Christmas Tree Iris Folding

Recycled gift wrapping hologram papers - shiny green and shiny silver with stripes and circles, and silver with white dots
White photo paper
Michael Strong's Christmas Tree Die Cutter
Snowflake punch (1 inch)
3D foam tape
Red blings

I used Michael Strong's Christmas Tree Die Cutter to cut a Christmas Tree shaped hole in my CS. It cuts like butter, it's a pleasure to work with these cutters (I'll save the cut-out tree for a later project).
I created the Christmas Tree Iris Folding on the back of my CS and turned it over, its textured side up.
I used recycled gift wrapping hologram papers - shiny green and shiny silver with stripes and circles, and silver with white dots which reminded me of snowflakes.

The papers were so sparkly that it was difficult to take a good photo of the card. Can you see how sparkling it is?
I glued the finished CS using 3D foam tape onto the card's basis for extra dimension.
I added several snowflakes, punched out of photo paper which is very white and resembles snow .
I added several red blings to add some glam.

(You can enlarge each photo by clicking on it)

Thanks for stopping by, I hope you enjoyed. Have a creative day! Dorly

Iris Folding Christmas Card

I'm Card Captain of the enjoyMichaelStrongstamps Yahoo Group for this week, so for 5 days I'll be showing you several works using Michael Strong's stamps. I hope you'll find them inspiring.
For my 4th card for this week I decided to use the Iris Folding technique.
You can find a very clear tutorial in Hetty's blog.
You can find the pattern in Michael Strong's blog.
If you want your pattern to match the size of Michael Strong's large Christmas Tree Die Cutter, print it after resizing it to exactly 11.31x 14.86 cms (who said size doesn't matter? lol)
I used contrasting yet complementary colors in order to get a classical card.

Ingredients:
White leather textured CS for the card's basis
Black canvas textured CS for the Christmas Tree Iris Folding
Recycled gift papers – shiny red and silver with white dots
Michael Strong's Christmas Tree Die Cutter
3D foam tape
Clear and red blings

I used Michael Strong's Christmas Tree Die Cutter to cut a Christmas Tree shaped hole in my CS.
It cuts like butter, it's a pleasure to work with these cutters (I'll save the cut-out tree for a later project).
I created the Christmas Tree Iris Folding on the back of my CS and turned it over, its textured side up.
I used recycled gift papers - shiny red and silver with white dots, which reminded me of snowflakes.
The papers were so sparkly that it was difficult to take a good photo of the card.
I glued the finished CS using 3D foam tape onto the card's basis for extra dimension.

I added several clear and red blings to add some glam.

(You can enlarge each photo by clicking on it)
Thanks for stopping by, I hope you enjoyed. Have a creative day! Dorly